دانلود Bentley SACS CONNECT Edition V16 Update 1 (16.01.00.01) نرم افزار تخصصی آنالیز دینامیک و غیر خطی سازه‌های دریایی

Minimum System Requirements    
SACS CONNECT Edition (v16.0) has the following minimum system requirements:    
• Pentium 4 or higher centralprocessing unit (CPU).    
• 1 Gigabyte (Gb) of RAM minimum.SACS performance is dependent onthe size of the SACS model and the amount of available system resources;see SACS System PC Recommendations below.    
• Microsoft Windows 8/8.1    
• Microsoft Windows 1O    
• Windows Media Player (for analysis sound file support)    
• A hard disk partition with 1.5 Gb of free space is required for the SACS installation.    
• A video card with a chipset that supports OpenGL. A reference list may be found at Supported Graphics Cards    
• Network Server and Network Client Installations - The LocalA rea Ethernet Network should be 100 Base-T or greater. TCP/IP network protocol is supported.    

SACS System PC Recommendations    
SACS CONNECT Edition (v16.0) will run satisfactorily with most basic new PC configurations for both laptops and desktop PCs.For minimal    
configuration PCs or older PCs. the most notable degradationin performance will be in 3D rendering applications (Precede) and when model size exceeds 1ooo joints. For model sizes greater than 1ooo joints it is recommended that additional memory and storage be added as stated below. The following recommendations are for optimal SACS performance.    
• RAM - 1024 megabytes (Mb) of free (1) RAM minimum, 4096 Mb or more is preferred. SACS will utilize all available RAM. SACS performance    
is dependent on the size of the SACS modeland the amount of available system resources.    
(1) Free RAM refers to available RAM after all operating system processes have been loaded.    
• CPU - A multi-core CPU is recommended although not required.    
• Operating System - Windows 8 Professionalor later.    
Note:A ll x86 versions of Windows cannot utilize more than 3200 Mb of RAM. The x64 version of Windows should be considered to take    
advantage of additionalmemory as wellas future SACS upgrades.    
• Hard Disk - 1.5 Gb of free space is required for the SACS installation.A SATA RAID o hard disk is recommended for optimal analysis performance.    
Note:After the SACS installation is complete the free space used for executions should not fall below 50% of the total drive capacity. Total    
free space for execution should be at least 1gigabyte for small model solutions.Very large model solution could require 400 gigabytes or    
more.    
• Video Card - A video card that supports OpenGLor DirectX9 is required for all 3D rendering SACS products.It is very important to make    
sure that the graphics drivers on your computer are up to date for maximum performance and correct operation.A reference list of available video cards can be found at Supported Graphics Cards.    


Recommen ded Computer Specs for Wind Turbine Parallel Processing    
• Processor: Fastest 64bit available {Inteli7 or better)    
• Number of Processors:Minimum 12 (without hyper threading preferred)    
• RAM:Minimum 12GB    
• BUS:Fastest Available    
• Storage:Solid State Drive 1.STB-2.0TBUsing the OptimalNumber of Pr,ocessors.    
It's important to determine the optimal number of processors required for fastest processing by benchmarking the system by running multiple    
analyses using different number of processors to determine the number which gives the optimalspeed.    
Note:1/0 to the disk/drive can be a bottle neck (hence the fastest bus and 1/0 requirements).