دانلود Omron Sysmac Studio v1.50 x64 - نرم افزار اتوماسیون خط تولید

Requirement
Operating system (OS) :
32-bit version:
Windows 7 (32-bit/64-bit)/
Windows 8 (32-bit/64-bit)/
Windows 8.1 (32-bit/64-bit) Windows 8.1 Update (KB2919355) must be applied.
Windows 10 (32-bit/64-bit)

64-bit version :
Windows 10 (64-bit)

CPU : If you create a user program with a memory size over 20 MB, the personal computer equipped with Intel® Core™ i7 or an equal/faster processor and the RAM of 8 GB or more is recommended.

32-bit version:
DOS/V (IBM AT compatible machines) personal computers equipped with Intel® Core™ i5 M520 (2.4 GHz) or equivalent/faster processors are recommended.

64-bit version :
DOS/V (IBM AT compatible machines) personal computers equipped with Intel® Core™ i5-3xxx(3rd generation: Ivy Bridge) or equivalent/later processors are required.

Main memory
32-bit version:
2 GB min.
4 GB min.

64-bit version :
4 GB min.
8 GB min.

Hard disk
Minimum 11 GB

Display:
XGA 1024 × 768, 16 million colors.
WXGA 1280 × 800 min. recommended

Communications ports : USB port corresponded to USB 2.0, or Ethernet port
For hardware (e.g. PC and CPU unit) connection methods and cables, refer to each hardware manuals.
Note: System environment for 3D Simulation Option is as follows.
      • DOS/V (IBM AT compatible machines) personal computers equipped with Intel® Core™ i5
         8250U (1.60-3.40 GHz) or equivalent/faster processors Intel® Core™ i7 9750H min. recommended.
      • 8 GB RAM min.
        16 GB RAM min. recommened
      • 1920 X 1080, 16 million colors full HD display min.
      • Video card: NVIDIA® GeForce® GTX1650 Ti min.


1. The applications listed in the table below have restrictions.

Application     Restriction
Sysmac Studio     When the Sysmac Studio does not start up with the Windows administrative authority, the
following restrictions are imposed.
• The simulation functions of NC Integrated Controller and the controllers with unit versions 1.09
or earlier are disabled.
• Calibration for running time estimation is not available.
• The simulation function of NA-series Programmable Terminals is not available.
• ESI files cannot be installed.

CX-Designer:
If a new Windows 7, Windows 8/Windows 8.1 or Windows 10 font (e.g., Meiryo) is used in a
project, the font size on labels may be bigger and protrude from the components if the project is
transferred from CX-Designer running on a Windows XP or earlier OS to the NS/NSJ.

CX-Integrator/Network:
Configurator:Although you can install CPS files, EDS files, Expansion Modules, and Interface Modules, the
virtual store function of Windows 7, Windows 8/Windows 8.1 or Windows 10 imposes the
following restrictions on the use of the software after installation.
• If another user logs in, the applications data will need to be installed again.
• The CPS files will not be automatically updated.
These restrictions will not exist if application data is installed using Run as Administrator.

CX-ConfiguratorFDT:
.NET Framework 3.5.1 is required to install when CX-ConfiguratorFDT is used with Windows 8/
Windows 8.1, or Windows 10.