دانلود APF WoodBeam v4.4.0.0 Portable نرم افزار طراحی و آنالیز تیر چوبی سقف، کف و ستون چوبی پرتابل (بدون نیاز به نصب)

The results are displayed in the graphic interface and the user can save a detailed report with calculation summary and images.

The user interface is designed to simplify your work. You can change every value (cross section size, timber beam length, etc.), recalculate, and the results are immediately available.

All the design variables, such as load coefficients, material properties (mechanical properties of timber), can be adjusted by you, according to your needs (or the requirements of any National Standard or National Eurocodes Annexes).

APF WoodBeam performs a finite element analysis of the timber beam, as a two dimensional timber structure, with the supports having the degree of stiffness selected by the user.
Internal forces, support reactions, and deflections are displayed by the graphical interface for each load case separately.

APF WoodBeam performs structural fire design according to Eurocode 5, using the reduced cross section method for both unprotected and protected surfaces. Surfaces can be protected by fire protective claddings whose properties are defined by the user.

Here are some key features of "APF WoodBeam":
Design, check and optimization of timber structures (beams, joists, columns)
- Design timber beams, timber joists, or timber columns
- Check strength, buckling, and deformations (you can choose which checks to perform)
- Check the notches along the element (bearing stress capacity with reduced section, and modified shear stress check)
- Structural fire design, for both unprotected and protected surfaces
- Quick summary of utilization factors
- Design is in accordance with Eurocode 5 (EN 1995-1-1:2004 + A1:2008 + A2:2014), all nationally determined parameters are editable
- Takes into account the contribution of deformation due to shear in deflection calculations
- Outputs figures and charts in JPEG or PNG, outputs drawings in DXF
- Clear and easy to read report in HTML or DOCX
- Materials covered:
  - solid timber (softwoods, EN338:2009 C14 ÷ C50; hardwoods, EN338:2009 D18 ÷ D70)
  - glulam (EN 14080:2013 GL20h ÷ GL32h, GL20c ÷ GL32c)
- You can add any number of concentrated or distributed loads
- Load Combinations are defined automatically (with support for custom combinations)
- You can add any number and type of supports and define their stiffness
- Semi-rigid end connections (as percentage of restrained rotation)
- Check at the supports for stress perpendicular to the grain