دانلود ANSYS Motor-CAD v2023 R2.1 x64 نرم افزار طراحی صنعتی مخصوص موتور
- بازدید: 842
دانلود نرم افزارموتور-کد ۲۰۲۳ / Motor-CAD 2023
Motor-CAD محصول شرکتی با همین نام یک نرم افزار طراحی مهندسی (CAD) بوده که به طور تخصصی برای طراحی و ارزیابی موتورهای احتراقی خودرها، توپولوژی آنها و طرحهای مفهومی آنها توسعه یافته است. این نرم افزار مجموعه ابزارهایی را کنار هم قرار داده تا کارایی، بهینه بودن، اندازه و هزینه موتورها را تعیین کرده و آنها به تعادل برساند. این نرم افزار شامل چهار ماژول اصلی EMag و Therm و Lab و Mech میشود که به مهندسین این امکان را میدهد تا محاسبات چند فیزیکی را به سرعت انجام داده تا کاربران بتوانند از طراحی مفهومی به طراحی نهایی در سریعترین زمان ممکن برسند. این نرم افزار برای طراحی از شبیهسازی المان محدود دوبعدی، آنالیز حرارتی، آنالیز الکتریکی و مکانیکی بهره میبرد که هر کدام در هر ماژول به طور مستقل فعالیت میکنند.قابلیتهای کلیدی نرم افزار Motor-CAD:
- طراحی موتورهای احتراقی از طراحی مفهومی تا طراحی نهایی
- دارای چهار ماژول مستقل برای مراحل مختلف طراحی موتور
- بهینهسازی کارایی، اندازه و هزینه طراحی و تولید
- بررسی خواص الکترومغناطیسی موتور
- انجام آنالیزهای حراراتی، الکتریکی و مکانیکی بر روی طرحها
- بهرهگیری از شبیهسازی دوبعدی المان محدود برای محاسبات
- مناسب برای محاسبات چند فیزیکی و آنالیز تنش
- انجام محاسبات روتورها و طول عمر قطعات
💿 نام نرم افزار | Motor-CAD 2023 |
📌 شماره نسخه | v2023 R2.1 |
📁 دسته بندی | ANSYS Motor-CAD |
💾 حجم فایل | 1060 مگابایت |
📅 تاریخ به روزرسانی | 1402/4/3 |
📊 تعداد دانلود | 830 |
❤️ هزینه دانلود | رایگان و نیم بها |
💡 آموزش نصب و فعال سازی | ✔️ |
سوالات متداول
نرم افزار Motor-CAD 2023 چیست؟
کاملترین و یکپارچهترین نرم افزار طراحی الکتریکی و حرارتی موتور
آخرین ورژن نرم افزار Motor-CAD 2023 را از کجا دانلود کنم؟
برای دانلود نرم افزار Motor-CAD 2023 به طور رایگان و با ترافیک نیم بها (در ایران) روی این لینک کلیک کنید.
آموزش نصب نرم افزار Motor-CAD 2023 چگونه است؟
راهنمای نصب نرم افزار Motor-CAD 2023 در این صفحه درج شده است.
کلمات کلیدی Motor-CAD 2023: motor-cad, fea, mechanical, electrical, thermal, electromagnetic performance, motor manufacturers, electromagnetic, thermal performance, electric machine, calculations, Accurate electromagnetic, thermal and mechanical, , موتور-کد, آنالیز المان محدود, مهندسی مکانیک, طراحی موتور خودرو, شبیه سازی موتور مکانیکی, کارایی الکترومغناطیسی, آنالیز عملکرد مکانیکی موتور, طراحی ژنراتورها, تولیدکننده موتورها, الکترومغناطیس, کارایی حرارتی, ماشین الکتریکی, مکانیکال, حرارتی و مکانیکی, نرم افزار ANSYS Motor-CAD, ,
Motor Design Ltd (an ANSYS business) full software collection,
پخفخق یثسهلد مفی (شد شدسغس ذعسهدثسس), ئخفخق یثسهلد مفی (شد شدسغس ذعسهدثسس),دانلود ANSYS Motor-CAD 2023 نرم افزار طراحی صنعتی مخصوص موتور,
How to crack Motor-CAD 2023,
طریقه/روش/راهنمای کرک,
Torrent/Usnet/Buy,
Setup,
Install,
دانلود رایگان نرم افزار,
P30Download,
Danlod/Danload/Donload,
nhkg,n kvl htchv,
Download Motor-CAD 2023 Software,
for windows,
Trial,
last Version/Edition,
New Version,
Update,
Free Full Licensed,
Repacked,
Direct Download Link (DDL),
Crack,
Get Motor-CAD 2023,
Keygen,
Patch,
Serial,
Portable,
برنامه Motor-CAD 2023 2023 R2.1,
The most complete and integrated electrical and thermal motor design software,
پخفخق-زشی 2023, ئخفخق-زشی 2023,خرید Motor-CAD 2023,
به روز ترین ورژن,
آخرین ورژن,
آخرین نسخه,
جدیدترین ورژن,
جدیدترین نسخه,
خرید موتور-کد ۲۰۲۳,
به روز ترین نسخه,
آخرین نسخه,
آخرین ورژن,
جدیدترین نسخه,
اموزش راهنمای نصب,
نسخه نهایی,
ورژن جدید,
l,j,v-:n ۲۰۲۳, l,j,v-:n ۲۰۲۳,2023 R2.1,
داونلود/دانلد/تورنت
کاملترین و یکپارچهترین نرم افزار طراحی الکتریکی و حرارتی موتور,
تحميل,
دریافت,
دانلود نرم افزار موتور-کد ۲۰۲۳ با ترافیک نیم بها,
برنامه موتور-کد ۲۰۲۳,
برای ویندوز,
فول لایسنس,
شماره سریال,
دانلود رایگان موتور-کد ۲۰۲۳ با لینک مستقیم,
کرک,
کیجن,
پچ,
پرتابل,
بدون نیاز به نصب,
لایسنس رایگان,
آپدیت,
دانلود انسیس موتور-کد v2023 R2.1 x64 - نرم افزار طراحی صنعتی مخصوص موتور,
پی سی,
پی 30,
سافت ور,
تریال,
سوفت ور,
مجانی,
2023-12-24
16:27:09
Motor-CAD 2023 2023 R2.1 Download
Motor-CAD is a unique software package dedicated to the electromagnetic performance of motors and generators and the optimisation of their cooling. Developed in 1998, Motor-CAD is used by major motor manufacturers and universities worldwide.
سیستم مورد نیاز Motor-CAD 2023
Ansys Hardware Recommendations & Supported 3rd Party Software:
Description
Ansys's comprehensive suite of software places demands on computing and hardware resources that can vary significantly from one model to another.
Important
Individual hardware needs are dependent on various factors that increase or decrease requirements and the information in this article is intended to be used as guidelines.
Supported Operating Systems
General Recommendations
• In general,Windows 10 (Pro,Enterprise or Education) is the most common operating system used by engineers and our customers to run Ansys and what we recommend. That said, OS support does
vary by product, particularly Ansys's more specialized products and Ansys does also provide broad support
for Linux as well.
UnSupported Operating Systems
• Windows 7 (unsu1212orted bY. Mi crosoft) & Windows 8 may run Ansys,
however, they are officially unsupported and we have experienced software errors while running on these OS's. We strongly recommend upgrading to Windows 10 for compatibility, performance and security reasons.
• Mac OS is not supported and Ansys cannot be installed on this OS. While you should be able run Ansys on a
Windows Virtual Machine inside Mac OS with a program like Parellels, this is NOT supported and your mileage may vary in regards to compatibility and performance will be hindered.
3rd Party Software & Hardware Support
Visit Ansys' Platform Support webpage for further details regarding supported OS's and 3rd party software & hardware that integrates with Ansys, such as:
• Summary of Future Strategy and Plans
• Supported Operating Systems by Ansys Application
• Supported CAD Software & Versions
Examples: ACIS,AutoCAD , CATIA,Creo,Fusion 360,IGES,Inventor,JT, Monte Carlo N-Particle, NX, Parasolid, Revit,Rhinoceros,SketchUp,Solid Edge, Solidworks, SpaceClaim, STEP
• Supported Browsers
• Supported 3Dconnexion Devices
• Supported GPU Accelerator and Co-Processor Capabilities
• Supported Graphics Cards
Examples:
• Nvidia - Quadro GV,Quadro P, Quadro RTX,Quadro T, RTX,T
• AMO - Radeon Pro,Ryzen, Ryzen Pro
• Supported Interconnects
• Supported Job Schedulers & Queuing Systems Support
• Supported Remote Display Applications
Computational Fluid Dynamics (CFO) Performance Considerations
CPU (Processor):
• Core scaling in CFO software is very good, therefore focus on Cores • Frequency = Effective Frequency, with
slight bias towards frequency.
• Both AMO and Intel CPUs are recommended,as long as the latest generation (AMO Zen cores)
Memory (RAM):
• Recommended RAM quantity is simulation dependent,but general recommendation is 4-8 GB per core, with more for small core count systems
• Memory bandwidth is very important,therefore get high frequency RAM (Le 2666 MHz or faster for non servers)
• To operate at maximum speed,all memory channels in both processors should be populated with equal amounts of memory.
Hard Drives:
• SSD not as critical but is beneficial to the user experience. High endurance SSD is not strictly necessary.
• CFO does not do a lot of Disk 1/0, so you can use SATA drives.
Graphics and GPU Acceleration:
See Mechanical recommendations above, no change.
Interconnect:
• 1 Gb/s interconnect is effective for small to medium clusters,investing in better can have a good return on
investment
Ansys CFO - ExamP.le Recommendations
• Workstation with NO HPC licenses i7-8700K (6 cores) with 64GB RAM, Ryzen 7 2700X (8 cores) with 64GB RAM
• Workstation with 1 HPC Pack i7-9920X (12 cores) with 64/128GB RAM, Threadripper 2950X (16 cores) with 64/128GB RAM
• Workstation with 2 HPC Packs Dual Xeon Gold 6140 (36 cores total) with 1921384 GB RAM, Dual EPYC 7351 or 7371 (32 cores total) with 128/256 GB
RAM
Mechanical Performance Considerations
CPU (Processor):
• Solver is aided by AVX5 12 support,thus IntelCPUs based on Skylake-SP and Skylake-X or newer are recommended. Check Intel ARK Database for AVX512 Support {but not Xeon Phi series)
• Examples of recommended CPUs for HPC applications: i9-9920X or Xeon Gold 6136 (12 cores}, Xeon Gold 6140 (18 cores • 2 = 36 cores)
• High core frequency is ideal, but actual frequency is dependent or core use,instruction set use,and adequate cooling WikiChiQ is an excellent resource on turbo speeds.
Memory (RAM):
• Memory capacity is very important The model solution should be solving in RAM (in-core) and not paging to
the hard drive (out-of-core ).About 15 GB per million degrees of freedom is required,but this is approximate (45 GB per million solid nodes in structural analysis).
• Fastest memory (Le. 2666 MHz for servers or 3200+ for i9 based desktops).
• To operate at maximum speed,all memory channels in both processors should be populated with equal amounts of memory.
• Note Purchasing more RAM will alleviate 1/0 issues,as (1) the solver can use this memory to avoid doing as much 1/0,and (2) the operating system can then use available RAM to cache or buffer these 1/0 that MAPDL writes.
Hard Drives:
• An SSD is highly recommended for all simulation work. NVMe SSDs are recommended when possible.
Intermediate endurance levels are recommended (-0 3 DWPD}, not QLC NANO.
• Note For DMP, the program writes results files for every core in use,so having SSDs with a lower seek time will reduce waiting for the hard drive seeks to read/write to all those different files. It also assists with post processing.
• Running large models out of RAM (out-of-core) will accelerate SSD wear (consume its write endurance) but is still preferable to not using an SSD.
Graphics:
• A mid-range graphics card (such as Nvidia Quadro P2000 and AMO Radeon Pro WX5100) can be used. These will not assist with solution time and only display graphics.
• Ansys maintains a list of tested graphics cards (other cards may/may not work as expected,but typically do work if of the same generation)
• Note It is important to keep graphics drivers updated from the card's vendor.
• Please refer to AnsY.S Hel12 and A nsY.S Platform Su1212ort for a recent list of supported Graphic Card models
GPU (for solution acceleration processing):
Interconnect:
• If clustering, a very high-speed interconnect is mandatory (40 Gb/s plus).
• QDR or FDR IB interconnect (or better) if you will be running on two or more nodes in parallel.
Ansys Mechanical - ExamP.le Recommendations:
• Workstation with NO HPC licenses:i7-9800X (8 cores) with 64/128GB DDR4-3200
• Workstation with 1 HPC Pack i7-9920X (12 cores) with 128GB DDR4-3200
• Workstation with 2 HPC Packs Dual Xeon Gold 6140 (36 cores total} with 192/384 GB DDR4-2666
Electronics (EBU) Performance Considerations
CPU (Processor):
• Look for latest generation CPUs with high frequency.
• Note HFSS is primarily an in-core solver,so clock speed and RAM speed is important
Memory (RAM):
• Recommended RAM is 8 GB per core HFSS, Maxwell, and other Electronic Packages or typically 64 GB - 256GB.
• Memory bandwidth is important,therefore get high frequency RAM (Le. 2666 MHz).
• To operate at maximum speed,all memory channels in both processors should be populated with equal amounts of memory.
Hard Drives:
• An SSD is highly recommended for all simulation work. NVMe SSDs are recommended when possible. Intermediate endurance levels are recommended (-0 3 DWPD}, not QLC NANO.
Graphics and GPU Acceleration:
See Mechanical recommendations above, no change.
Interconnect:
• QDR or FDR IB interconnect if you will be running on 2 or more nodes in parallel (on a cluster,minimum 1OGb
network)
Discovery Live
Generol Requirements
Minimum requirements for Ansys Discovery software are as follows
• 64-bit Intel or AMO system, running Windows 10.
• 8 GB RAM
• A dedicated graphics card with latest drivers and at least 1GB video RAM, capable of supporting OpenGL 4.5 and DirectX 11, or higher. Use of integrated graphics (e g.Intel HD/IRIS) is not recommended and is not support by the Refine stage in Discovery. See below for special graphics requirements for ANSYS Discovery Live.
• 3 button mouse
Ansys Discovery Live and Discovery Explore Stage Graphics Card Requirements
Ansys Discovery Live or the Explore stage in Ansys Discovery relies on the latest GPU technology to provide its
computation and visualexperience. To run the software,you will require:
• A dedicated NVIDIA GPU card (Quadro recommended,GeForce supported) based on the Kepler, Maxwell,
Pascal,or Turing architecture. Maxwell 2000 or better strongly recommended.
• At least 4GB of video RAM (8GB recommended) on the GPU.
مشخصات جدیدترین/آخرین نسخه/ورژن برنامه Motor-CAD 2023 2023 R2.1
نام انگلیسی: Motor-CAD 2023
شماره نسخه: v2023 R2.1
نام فارسی: موتور-کد ۲۰۲۳
حجم فایل: 1060 مگابایت
تاریخ انتشار: 16:24 - 1402/4/3 | 2023.06.24
امتیاز: 3.5/5