دانلود NUMECA HEXPRESS/Hybrid v9.2 x64 + Documentation + Tutorials نرم افزار مش بندی شش وجهی اشکال پیچیده هندسی

Supported platforms and operating systems
NUMECA software is supported in 64 bits on x86_64 processors only (64 bits processors that are compatible with Intel 8086 set of instructions).

Formally tested on
- Windows 8.1 Professional -
- Windows 10 Professional -
- Windows HPC 2012
Also known to run on*
- Windows 7 Professional
- VISTA Business
- VISTA Ultimate
- Windows Server 2008
- Windows Server 2012
- Windows Server 2016
* Known from partners and/ or customers. No official support offered on these combinations

Hardware requirements
Next to the standard hardware (monitor, keyboard and mouse), some specific recommendations apply in the use of NUMECA software:
- a mouse with scroll wheel is strongly recommended.
- the monitor should support 24-bit color graphics and have a 1280 x 1024 pixel resolution for adequate visualization.
- an Ethernet card should be installed and properly configured.
- NUMECA Software does not support CXFS (Clustered XFS) and IBRIX disk file systems.

Specific to HEXPRESS/Hybrid
- HEXPRESS/Hybrid makes direct use of OpenGL libraries. These libraries must thus be up-to-date, properly installed and configured before HEXPRESS/Hybrid can be started.
- Tests have only been performed on NVIDIA graphical cards.

Memory and disk space requirements
The Random Access Memory (RAM) required to run NUMECA software depends upon several factors, in particular including the number of grid points inserted in the grid, the physical models selected (turbulence, adaptation,…), the introduction of non-matching boundary conditions and the selected calculation mode (mixed or double precision).

Similarly, a minimum disk space is required on the hard disk to allow the storage of the project files. The size of these files largely depends upon the number of grid points generated.

HEXPRESS
- The use of minimum 1 GB RAM is strongly recommended. As a general guideline, about 0.5 to 0.7 GB RAM are required to run a one million nodes project. The suggested swap space should be equivalent to at least 3 times the RAM installed.
- As a general guideline, a minimum of 300 MB is required to store the project files (provided that the geometry is not defined by Parasolid or CATIA files) for a one million nodes project.

HEXPRESS/Hybrid
The Random Access Memory (RAM) required to run HEXPRESS/Hybrid depends upon several factors. In particular, the complexity of geometries and the settings of the CONF file. As a general guideline, the Random Access Memory (RAM) required to run HEXPRESS/Hybrid are:
- for mesh without viscous layers - between 500 MB and 700 MB RAM per million of cells
- for mesh with viscous layers - between 700 MB and 900 MB RAM per million of cells
The use of minimum 4 GB RAM is mandatory, but the installation of 8 GB is recommended. The suggested swap space should be equivalent to at least three times the RAM installed.
About 1 GB is required to store a two million nodes mesh in SPH format.

Graphics requirements
NVidia graphics cards are fully supported, installed together with the latest drivers.

NUMECA software makes use of the advantages of the available Graphics Card. Some trouble may however come up with the default driver OPENGL since it may not be supported by the user host computer and machine display. In order to set the system compatible with a more portable driver, typically MSW driver is used under Windows instead. Note however that the proposed drivers are usually less efficient in terms of graphical speed than the default driver.