دانلود NUMECA FINE/Turbo v17.1 x64 نرم افزار دینامیک سیالات برای سیستم‌های دوار و چرخنده

Supported platforms and operating systems
NUMECA software is supported in 64 bits on x86_64 processors only (64 bits processors that are compatible with Intel 8086 set of instructions).

Formally tested on (Windows)
- Windows 10 Professional
- Windows 11 Professional

Please also notice that the following limitations apply:
- Computations under Windows (except Windows Server) are limited to one PVM daemon running at a time. As a consequence, access to multiple users on a given machine is not allowed,
- Parasolid uses SSE2 instruction for high performance. If your platform is not supporting the SSE2 instruction, the FINE GUI cannot be started.
- AMD EPYC and RYZEN processors are slower on Windows 10 compare to Linux.


Multiprocessors calculations
Multiprocessors calculations are allowed on shared and homogeneous distributed platforms. Non-homogeneous configurations are not allowed.

The following limitations additionally apply:
- Multiprocessors calculations are allowed on distributed platforms in local user configurations provided that the same account is used for all machines,
- Domain administrators are not allowed to run multiprocessors calculations.
- MPICH2 library needs Microsoft .net Framework package before installing NUMECA software otherwise execution of mpiexec.exe will lead to a Windows error message.


Hardware requirements
Next to the standard hardware (monitor, keyboard and mouse), some specific recommendations apply in the use of NUMECA software:
- a mouse with scroll wheel is strongly recommended.
- the monitor should support 24-bit color graphics and have a 1280 x 1024 pixel resolution for adequate visualization.
- an Ethernet card should be installed and properly configured.
- NUMECA Software does not support CXFS (Clustered XFS) and IBRIX disk file systems. (Windows)


Memory and disk space requirements
The Random Access Memory (RAM) required to run NUMECA software depends upon several factors, in particular including the number of grid points inserted in the grid, the physical models selected (turbulence, adaptation,…), the introduction of non-matching boundary conditions and the selected calculation mode (mixed or double precision).

Similarly, a minimum disk space is required on the hard disk to allow the storage of the project files. The size of these files largely depends upon the number of grid points generated.

More product specific details:
FINE/Turbo
As a general guideline, a minimum 100 MB is required to store the mesh and solution file (one file, no full non-matching connections, solution stored after one iteration) when running a one million nodes project.

The memory (RAM) required to run FINE/Turbo depends upon several factors, in particular including the number of grid points inserted in the grid, the physical models selected (turbulence, optional modules,…) and the introduction of non-matching boundary conditions. The use of minimum 1 GB RAM is strongly recommended. As a general guideline, about 0.5 to 0.7 GB RAM are generally required to run a one million nodes project. Furthermore, the FINE/Turbo solver has a memory limit of 8.59 GB per process. This is thus the maximum memory requirement for a sequential computation. The suggested swap space should be equivalent to at least 3 times the RAM installed