دانلود NUMECA FINE/Open v10.1 with OpenLabs x64 + Documentation & Tutorials پیشرفته‌ترین نرم افزار حل معادلات جریان و دینامیک سیالات

Supported platforms and operating systems Windows
NUMECA software is supported in 64 bits on x86_64 processors only (64 bits processors that are compatible with Intel 8086 set of instructions).

Formally tested on
- Windows 8.1 Professional -
- Windows 10 Professional -

Please also notice that the following limitations apply:
- Computations under Windows (except Windows Server) are limited to one PVM daemon running at a time. As a consequence, access to multiple users on a given machine is not allowed,
- Parasolid uses SSE2 instruction for high performance. If your platform is not supporting the SSE2 instruction, the FINE™ GUI cannot be started.
- AMD EPYC and RYZEN processors are slower on Windows 10 compare to Linux.

Multiprocessors calculations
Multiprocessors calculations are allowed on shared and homogeneous distributed platforms. Non-homogeneous configurations are not allowed.
The following limitations additionally apply:
- Multiprocessors calculations are allowed on distributed platforms in local user configurations provided that the same account is used for all machines,
- Domain administrators are not allowed to run multiprocessors calculations.
- MPICH2 library needs Microsoft .net Framework package before installing NUMECA software otherwise execution of mpiexec.exe will lead to a Windows error message.

Hardware requirements
Next to the standard hardware (monitor, keyboard and mouse), some specific recommendations apply in the use of NUMECA software:
- a mouse with scroll wheel is strongly recommended.
- the monitor should support 24-bit color graphics and have a 1280 x 1024 pixel resolution for adequate visualization.
- an Ethernet card should be installed and properly configured.
- NUMECA Software does not support CXFS (Clustered XFS) and IBRIX disk file systems.

Memory and disk space requirements
The Random Access Memory (RAM) required to run NUMECA software depends upon several factors, in particular including the number of grid points inserted in the grid, the physical models selected (turbulence, adaptation,…), the introduction of non-matching boundary conditions and the selected calculation mode (mixed or double precision).
Similarly, a minimum disk space is required on the hard disk to allow the storage of the project files. The size of these files largely depends upon the number of grid points generated.

OpenFINE/Open with OpenLabs
The use of minimum 1 GB RAM is mandatory, but the installation of 2 GB is recommended. As a general guideline, about 1.5 GB RAM is generally required to run a one million nodes project in double precision mode. The suggested swap space should be equivalent to at least 3 times the RAM installed.
Mesh partitioning for parallel computations requires about 1 GB memory per million cells. When using serial partitioner, the user must ensure that the memory on the head node is sufficient, because the partitioning is performed only on the head node in case of serial partitioning.
As a general guideline, a minimum 1.4 GB is required to store the mesh and solution files (one file, no full non-matching connections, solution stored after one iteration) when running a one million nodes project.