دانلود NUMECA FINE/Marine v9.2 x64 - پیشرفته‌ترین نرم افزار دینامیک سیالات برای سیستم‌ها و سازه‌های دریایی

Supported platforms and operating systems

NUMECA software is supported in 64 bits on x86_64 processors only (64 bits processors that are compatible with Intel 8086 set of instructions).

Formally tested on
- Windows 8.1 Professional
- Windows 10 Professional
- Windows HPC 2012

Also known to run on *
- Windows 7 Professional
- VISTA Business
- VISTA Ultimate
- Windows Server 2008
- Windows Server 2012
- Windows Server 2016

* Known from partners and/ or customers. No official support offered on these combinations

Multiprocessors calculations

Multiprocessors calculations are allowed on shared and homogeneous distributed platforms. Non-homogeneous configurations are not allowed.

The following limitations additionally apply:
- Multiprocessors calculations are allowed on distributed platforms in local user configurations provided that the same account is used for all machines,
- Domain administrators are not allowed to run multiprocessors calculations.
- MPICH2 library needs Microsoft .net Framework package before installing NUMECA software otherwise execution of mpiexec.exe will lead to a Windows error message.

Hardware requirements

Next to the standard hardware (monitor, keyboard and mouse), some specific recommendations apply in the use of NUMECA software:
- a mouse with scroll wheel is strongly recommended.
- the monitor should support 24-bit color graphics and have a 1280 x 1024 pixel resolution for adequate visualization.
- an Ethernet card should be installed and properly configured.
- NUMECA Software does not support CXFS (Clustered XFS) and IBRIX disk file systems.

Memory and disk space requirements

The Random Access Memory (RAM) required to run NUMECA software depends upon several factors, in particular including the number of grid points inserted in the grid, the physical models selected (turbulence, adaptation,…), the introduction of non-matching boundary conditions and the selected calculation mode (mixed or double precision).

Similarly, a minimum disk space is required on the hard disk to allow the storage of the project files. The size of these files largely depends upon the number of grid points generated.

More product specific details:

FINE /Marine

The use of minimum 2GB of RAM is mandatory, but the installation of 8 GB is recommended. As a general guideline, about 2 GB RAM is generally required to run a one million nodes project. The suggested swap space should be equivalent to at least three times the RAM installed. For parallel computations, a multi-processors environment with 2GB of RAM per core is recommended. In such case the suggested swap space should be equivalent to at least one time the RAM installed.

Mesh conversion and partitioning for multi-processor calculations requires about 1 GB per million cells. Since mesh partitioning cannot be performed taking benefit of multi-processor environments, access to nodes allowing large RAM (from 4 to 16 GB) may be mandatory during mesh partitioning.

As a general guideline, about 1.6 GB is required to store a one million nodes mesh, with flow solution on disk. The minimum storage is fixed as 400 MB per million cells, but this only guarantees proper restart procedures without direct possibilities for the visualization of the flow solution.

Graphics requirements

NVidia graphics cards are fully supported, installed together with the latest drivers.

NUMECA software makes use of the advantages of the available Graphics Card. Some trouble may however come up with the default driver OPENGL since it may not be supported by the user host computer and machine display. In order to set the system compatible with a more portable driver, typically MSW driver is used under Windows instead. Note however that the proposed drivers are usually less efficient in terms of graphical speed than the default driver.