دانلود TechnoSoft AMETank v14.1.13 نرم افزار طراحی مخزن

Designs and Configurations
A wide range of storage tank designs and configurations are supported.
Roof layouts include self and structurally supported, single and multi-bay flat, cone, and umbrella with knuckle design.
Roof structures include various configurations for columns, girders, rafters, and brackets.
External and internal floating roofs are supported.
Shell courses, stiffening rings, and anchor chairs can be configured with various dimensions and types.
Bottom types include sloped or shoveled with staggered or ribbon layout with optional annular or bearing ring.
Plates can be overlapped or butt welded with or without backing bars.
Various foundation designs are supported.

Feature Based Design
AMETank© supports a fully interactive 3D graphical user interface.
The configuration and layout of the tank shell, floor, roof and structure, and subsystems is facilitated through
intuitive menus with options customized specifically for tank design.
A complete design can be configured and detailed in less than two hours including the automatic generation of:
- Tank 3D geometry with production details.
- To-scale drawings including elevations, fabrication details, and assembly layout.
- Components fabrication list, bill of material, weight reports, and cost data.


3D Model, Drawings, BOM
From configuration and design to 3D geometry, detailed bill of material, purchase list, cost data,
and to-scale fabrication and layout drawings, in two hours.
Within minutes design changes can be made to modify, add, or delete features.
The 3D geometry, drawings, bill of materials, plate cut data, and cost reports are automatically updated.
Custom and easy to use graphical interface.
AMETank© can be mastered in two days of training.

Drawings and Reports
The plates layout and fabrication details for shells, floors, and all roof types including designs with knuckle edge
plates are provided.
Details include plate dimensions, overlaps, and welds types.
Output for NC machines is supported.
Shell weld maps, and shell roll out drawings, with details including appurtenances, stairs, ladders, and other
systems are supported.
Detailed assembly and components fabrication drawings for all substructures, appurtenances, ladders, platforms,
stairs, and any othersubsystems are supported.
3D geometry, drawings, bill of material, weights, and cost data can be edited within AMETank© or exported.


Digital Reconstruction
TechnoSoft provides services for laser scanning and digital reconstruction of tanks, terminals, refineries, and other assets.
For tanks, the scan can be performed on the inside to support geometric evaluation and integrity analysis of the as-built condition.
The point cloud data of the tank inside is used in the 3D reconstruction of the tank shell, roof, structure, floor, and all appurtenances.
The analyses of tanks for bottom and foundation settlement, shell roundness and verticality, structural column verticality, and floating roof to shell operation assessment are also included. Tank calibration and generation of strapping tables are also supported services.
Detailed reports on the geometric evaluation of the tank as-is condition include the generation of 3D models and layout drawings of the floor, shell, roof, structure, and appurtenances. Designing of floating roofs and replacement of floors, roofs,
and roof structures is supported through the use of the AMETank application.