دانلود Csimsoft Bolt v1.1.0 x64 نرم افزار طراحی ساده و سریع انواع مش ها

Get excellent results—fast.
For many complex simulations, Bolt produces equivalent or superior results when compared to pave-and-sweep meshes that take hours or days to generate. Depending on the type of analysis you are doing, Bolt can give you excellent results in minutes.

No more cutting up models.
Traditional pave-and-sweep meshing methods require you to decompose the model into sweepable volumes. This could be more than 60% of the time it takes to get a good mesh. Bolt uses a very advanced overlay-grid method to generate an all-hex mesh. Unlike the pave-and-sweep method that takes hours or days to prepare, Bolt allows you to mesh your model with the simple click of the Mesh button.

Tolerant of dirty geometry.
You know that all geometry is not the same. Many of the models you get from a designer require significant clean up and defeaturing. Repairing problems takes time, a lot of time. Bolt doesn't require you to manually fix gaps, overlaps, or misalignments. Bolt uses a new volume fraction approach that has been developed and tested for more than six years to accurately represent the topology of your model without having to fix it first.

Massively parallel.
Even without having to clean up and prepare your geometry, large and complex models can take a long time to mesh. Bolt speeds up actual meshing time by dividing the model into parts and meshing each part in parallel. Bolt's meshing algorithm is massively parallel and will use as many processors as specified and available.

The Bolt meshing process.
The Bolt meshing process begins with creating a Cartesian grid base mesh of a bounding box around your model. Nodes from the base grid that are near the boundaries are projected to the geometry, locally distorting the nearby hex cells. A pillow layer of hexes is then inserted at the surfaces by duplicating the interface nodes on either side of the boundaries and inserting hexes. While constraining node locations on the interfaces, Bolt uses a set of smoothing procedures to improve mesh quality of the boundary hexes.

The Bolt difference.
Grid overlay methods are not new. It's pretty easy to create a conformal or stair-step mesh of perfect hexes inside a model. What isn't easy is the superior way that Bolt handles the layer between the conformal mesh and the geometry's outer surface. Bolt's sophisticated algorithms ensure that these hexes are of the highest quality. That's what makes a Bolt mesh superior.